Installation of Small Submersible Pump: How to install it by yourself?
Now that you have finally got the best Small Submersible Pump, you may be in a dilemma between hiring a professional plumber to install it for you or installing it yourself.
The good news is that the installation part is not as difficult as most people think. With a proper set of instructions and willingness to do it, you can get the job done quickly and easily.
Let us discuss the key installation steps required to install a Small Submersible Pump:
Step 1: Set up the basin
The first thing you need to do is to install a basin so that whenever you flush the toilet, water will drain into it. Install the water basin on the floor and connect your pump to it. Make sure that the pump does not shake to prevent it from tipping or falling when hit by water. The basin should also be firmly fixed to the ground to prevent any cracks or leaks.
If you already have a septic tank or septic tank installed in your home, this step will be easier for you because you only need to connect the pump.
Step 2: Install the float switch
After installing the Small Submersible Pump in place, you can continue to set the float switch to detect when the pump starts pumping. The way the switch works is that when wastewater arrives, it will automatically turn on the pump-sucking the waste into the basin or septic tank through the check valve.
Confirm that the vents and discharge ports are not blocked or blocked to ensure the efficient operation of the pump.
Step 3: Piping and testing
You can choose to use 4-inch pipes or 3-inch pipes (if you prefer smaller pipes) for side inlet pipes.
After the plumbing is complete, test your toilet and drain to make sure they are working well. Make sure that the pool or pump shows no signs of flooding or leakage in the yard. If there is any leakage, please make the necessary readjustment or add some hard glue of your choice.
Stainless Steel Submersible Sewage Pump is also our product, welcome to consult and purchase.
