When using transfer paper on white and light-colored fabrics, first print the image (mirror image or horizontal flip) from left to right, roughen the image around it, then place the printed image face down on the receiving fabric, and keep it steady. Surfaces that will not be damaged by the heat of the iron.

Do not use an ironing board. The iron must be at least 1,400 watts of iron, ideally more, and connected and heated at maximum heat for about 8 to 10 minutes. If it is a steam iron, turn off the steam before inserting the steam iron. Make sure there are no wrinkles on the receiving fabric.

Iron the back of the transfer paper firmly in a small circle to ensure that the pressure is not lost when the steam nozzle is at a constant pressure, and that the transfer paper does not move relative to the fabric. After lasting about three minutes under stable, uniformly distributed pressure, remove the iron, wait for about one minute, and then gently peel the paper off the transferred image.

After peeling off the stabilizer, the image will be displayed on the fabric. To ensure a good transfer, place the supplied silicon wafer or high-quality conventional printing paper on the printed image, and iron for about one second. 1 minute, peel off while hot.

If you are using a hot press, skip the ironing phase and make sure to use it at 180 degrees for 13 seconds and then press with silicon for 3 seconds.

When using transfer paper for black or dark fabrics, print the image in regular mode without mirroring. Use an easy-to-trim block image because unprinted areas will appear white on the fabric. After the transfer is printed and trimmed, the vinyl layer is peeled off the backing paper and spread over the fabric. Now, cover it with the provided silicon paper and iron it on the silicon paper for 3 minutes, press it firmly on each position of the transfer, and press it in the form of small circles to ensure that the image firmly adheres to the fabric on. Finally, simply remove the silicon paper from the transfer.

If you are using a hot press, skip the ironing stage and make sure to use it for 13 seconds at 180 degrees without pressing.

We provide professional fully automatic heat transfer printing machine. If you are interested, please visit our official website.