In order to ensure the service life and work efficiency of the Siomai Making Machine, we must regularly maintain and maintain the Siomai Making Machine. Next, we will tell you what steps are required for the Siomai Making Machine to be maintained and maintained.

　　 One, after using the Siomai Making Machine every day, the hopper and the auger should be cleaned in time to ensure that the buns produced by Siomai Making Machine are clean and hygienic and free of impurities. Every time you use the Siomai Making Machine, you need to check whether it can work normally. During the process of disassembly, washing and installation, you must install it in accordance with the instructions. You cannot use violence to install it, because these improper operations will affect the normal operation of the machine. Working.

　　Second, the bearings of the Siomai Making Machine need to be disassembled and washed once every six months. If there is a problem, it needs to be replaced in time to ensure normal operation. After cleaning the blade, you still need to look at the specific placement position. As long as the placement position is reasonable, there will be no bad effects. Daily routine maintenance is also very important. The Siomai Making Machine operation needs to be carried out in accordance with the instructions. operating.

　　 In order to ensure that the Siomai Making Machine can work efficiently for a long time, we need to clean the Siomai Making Machine regularly to ensure that the Siomai Making Machine can work normally. Next, we will introduce the correct cleaning method of the Siomai Making Machine.

　　 Energy Ball Making Machine correct cleaning method:

　　1, Siomai Making Machine needs to take out the filter for cleaning. However, it should be noted here that the body of the Siomai Making Machine must be completely cooled in order to clean it. After flushing in the reverse direction, the impurities on the filter screen are rinsed, and if necessary, use a brush to gently scrub the filter screen.

　　2. Brush the filter clean and put it back into the machine in time, and pay attention to the correct position.

　　3. When cleaning the Siomai Making Machine, pay attention to the removal of debris and do a good job of collecting impurities. After the operation, the site must be cleaned.

　　4. If the mixing blades are difficult to clean, try several times. Do not use abrasive cleaners and hard wool fabrics to clean them to avoid damage to the non-stick layer and affect the next mixing and cleaning effect.