At first glance, one might find this question surprising. And yet, if you notice ice inside your refrigerator or a layer of gel on your food, something is wrong. In fact, your fridge needs an adequate environment, and every component is operational in order to guarantee you an optimal daily service.
It is not always easy to quickly identify the source of the problem, so we chose to point to the different parts of your fridge to examine.
A problem with your refrigerator?
The environment, the first imbalance factor
The fridge is not ideally placed
Positioned next to a radiator or oven, the opening of your refrigerator will bring in warm, moist air that will increase its production of cold brutally, and consequently its production of frost. Prefer a place away from direct heat sources. We also advise you to "let your refrigerator breathe" leaving at least 5 centimeters between it and the wall against which it is leaning.
The fridge is too full
In order to keep the freshness of your food optimally, it is always best not to overfill your refrigerator at one time. This will result in excessive cold production. Also remember not to stick any elements against the bottom wall, as this may cause an anchor point for freezing.
The seal of the door is no longer waterproof
Usually consisting of a magnetized part then a bellows part, the latter can quickly be obstructed by food residues or dust. If the door seal is damaged or no longer applies properly when the door is closed, hot air can seep in and create frost. Remember to clean the door seal of your fridge on a regular basis.
Need to replace the seals of your fridge?
Do you need professional intervention for troubleshooting or small jobs? Call MyDepanneurs.fr quickly on 09 74 73 54 08 (the price of a local call).
Key elements that can be damaged
Once the first checks are completed, it is the submerged part of the iceberg that will have to pay attention.
The door switch
If the bulb inside your fridge remains on, it will spread heat continuously. A bad temperature will set in, and the cooling system will create a surplus of cold to compensate.
The defrost timer
This timer allows the automatic activation of the defrosting of your fridge. You can turn the timer manually until you turn on the defrost, you will hear a "click". The unit itself must be kept cold, but the resistance inside must heat up. If this is not the case, the timer or the resistor is probably damaged.
Temperature probes
The Whirlpool Fridge Price in Bangladesh and freezer probes are used to measure the temperatures in the different compartments. If they are defective, they can create an excess of frost.
The thermostat
If the thermostat is damaged, it will not be able to regulate the temperature of your refrigerator. To check that it is working properly, place the tip of the thermostatic probe in the fridge in a glass of very cold water, and regulate your thermostat using the knob. If it does not fire, you will probably have to replace it.
The compressor
The compressor is the heart of your refrigeration system. It is through it that the flow of fluid begins that will allow your fridge to stay at a good temperature, interrupting the cycle when necessary. If this element has deteriorated, we recommend that you seek the assistance of a refrigeration technician.
The refrigerant circuit
The engine oil in your refrigerator can seep into the refrigerant circuit, cause a plug, and cause an excessive cold. It is also possible that your circuit experiences a loss of refrigerant gas. We advise you to call a professional to identify the origin.
The electronic card
If the electronic temperature control board is faulty, the fridge will not stop, creating cold continuously. If you notice that the previous items are in good condition, we advise you to use refrigeration so that he can perform the replacement of this room.
Tag:
