AC is your friend and most reliable partner in cooling you during the summer heat. AC's should not take too much load to provide cool air. AC's need to be cleaned from time to make sure they are still giving you cool air. Here is how to clean an AC split with two components. The first is the AC conditioner (Indoor System), usually found in a square shape. The other component is the condenser, which is a larger container with a fan inside.
It is impossible to keep dirt out of your home, no matter how clean it is. Therefore, it is important to clean every House device, including AC, at least every four months. We have broken down the cleaning into two parts: cleaning your outdoor system and your indoor system. Your Midea ac price in BD doesn't require you to spend any money. To reach the AC level, all you need is a ladder or stool.
Cleaning Of Indoor System:
Tips 1- Cover Indoor With Trash Bag. Your primary purpose in opening your AC unit is to clean it and prevent filth from settling on your floors. Therefore, cover it with a Bag or Waste bag to avoid dirt and dust entering your AC's interior. I recommend using an elastic pouch that can be adjusted according to the AC size.
Tips 2- Turn off the Main Energy Button on both Systems. This is a vital tip since cleaning an AC while it is not plugged can be dangerous. Therefore, the AC plug, condenser, and main buttons of your House should be removed.
Tips 3- Removing Air Filters: First, you need to remove your front panel. To do this, pull the grooves from the side, and the front panel will fall off. The next step is to take all rectangular-shaped filters out of the AC. These air filters are the most contaminating part of cleaning an AC. This is the end of your 85% work. The air filters can get so filthy that it will be impossible to see your face through them.
Tips 4 – Soak the removed air filters in detergent. Once you have removed all dust, use a tub to mix water and detergent. Place the air filters inside the tub. Clean them with a soft cloth. After cleaning the air filters thoroughly, allow them to dry in the air.
Tips - Cleaning Cooling Finns or Coil: It can be challenging to clean cooling fins. The cooling fins look similar to a set of silvery strings that run from the source of cold air.
Tips 6: Cleaning other parts. After cleaning out the main features like Cooling Fins and filters, you need to use a cleaner-like Colin. First, spray it all over your air conditioner. Then, clean it with a piece of newspaper or white cloth.
Tips 7: Replace the filters. Once you have cleaned all indoor parts, it is time for the air filters to be returned to their original condition. You must first remove the External Panel, which was released for cleaning Cooling Fins, and then place the Air Filter as instructed by the User Manual.
Tips 8 - Clean the connections pipes. Disconnect all lines connecting the AC and condenser. Use a vacuum cleaner to blow away all dirt and debris in the ducts. You can then use pressured water for any blockage and allow them to dry.
Tips 9: Press the button on your air conditioner to test if it is working correctly.
Cleaning of outdoor System:
Tips 10- Cleaning the Condenser Fins: The condenser fan is easy to clean. All that's needed is a toothbrush and a container of water.
However, Condenser coil can have more stubborn dirt than what you see outside. So, you could use a knife and slide it through condenser fins. After you have cleaned away all the stubborn dirt, clean the fins with water pressure. Let it air dry.
Tips 11- Cleaning the Fan: You can clean the Fan using a dry cloth. Next, spray water to loosen any soil.
Place all of the parts and buttons back on the plug, and you will enjoy the freshness and clean airflow from your Samsung ac price in Bangladesh. This simple yet effective method of cleaning an Air conditioner price in BD at your home might appeal to you.
Tag:
