We all need good mould craftsmanship to make it outstanding. Exquisite craftsmanship can effectively reduce costs and working hours. If there is an error, it will lead to mold welding. By the way, poor processing will affect the function of the Bucket Mould, reduce the life of the mold, and even get hurt and cracked during the injection molding process.
Polishing is the last part of mold production. Polishing also helps and complements the role of the mold, especially for demolding. A lot of the production of some molds is not smooth, because the lighting is not in place, the resistance is too large, it is difficult to demold, and even the top is white and the top is cracked.
The mold is like an assembly machine. Every part and every screw must not go wrong, otherwise, the consequences will be very serious. It may cause product defects, affect production, or even completely damage the mold, resulting in scrap. Therefore, assembly work must be very detailed. During the assembly process, special attention should be paid to the cleaning of the mold, especially the cleaning of the water channels and screw holes. Make sure to blow away the iron filings inside.
Anyone with many years of mold experience knows the importance of cooling to molds. Due to the increase in prices and labor wages, when mass production of products, the profit brought by reducing the injection cycle by one second is unimaginable. However, when the production cycle is accelerated, the temperature of the mold will rise. If it cannot be controlled effectively, it will cause the mold to overheat and fail to form, and even cause the mold to deform and damage. Therefore, good cooling system design is especially important, including density, diameter, and interconnection of water channels.
Mold maintenance is mainly maintenance and maintenance during the production process. The mold is like a car. If it is not used for a long time without maintenance, it may be scrapped and die. Therefore, after each use of the mold, comprehensive maintenance is required, especially the rust prevention of the molded parts and the rust prevention of the main moving parts. Since the mold needs to be filled with water during the production process, the mold may be filled with water during the installation or disassembly process, so it is necessary to ensure that the mold is dry before applying a layer of oil to protect it.
We need to concentrate on these details and proceed in the right way to ensure that high-quality molds are produced to create a good product line.
SHINE MOULD is China's leading bucket and Stool Mould manufacturer. We make more than 100 sets of various molds every year. We help customers design different styles to meet their local markets.
