Twin Screw Pumps W Model


Twin Screw Pumps W ModelTwin Screw Pumps W Model

.

Twin Screw Pumps W Model

Horizontal pumps with lateral suction flange, delivery flange directed to the top. The pump casings are symmetrically design so that the suction line can be connected on the left or right side by simply turning the casing. Mostly pumps are installed in horizontal position on a base frame directly connected to motor by a flexible coupling.To get more news about MONO pump Accessories, you can visit hw-screwpump.com official website.

Horizontal mounted rotary, positive displacement Twin Screw Pumps with external bearings and timing gears.
Suitable for handlingvery low to highly viscous liquids.
Self-priming, noiseless and vibration free operation.
Casings are available in different materials such as Cast Iron Carbon Steel Cast and carbon steel fabricated.
Pump available with heating foot and heating jacket suitable for handling liquid at Medium and High temperature.
Special design Screw Shaft assembly suitable for variation in flow and pressure
Can be driven with Motor/Engines/Steam Turbines.
Can handle virtually any non-homogeneous fluid, regardless of viscosity, lubricity or abrasiveness e.g. seawater, bitumen, lime, acid, caustic solution or hydrocarbon,Crude Oil, Additives, Paraffin, Base oils, Petroleum products, Polyester, Fuel oils - all grades, Residues, Lubricating oils - all grades.
Innovative and hygienic design, highly economical, optimum MTTR value – main reasons for HYGHSPIN.

The HYGHSPIN stainless steel pump series from Jung Process Systems have been proved worldwide and can be used for flowable products with practically all viscosities and consistencies – whether aqueous, highly viscous, lumpy, fibrous, or gas-laden.The HYGHSPIN Hopper is an addition to the worldwide proven stainless steel HYGHSPIN series. The innovative twin-screw pump with hopper opening is able to handle products with a viscosity of up to 1000 mPa·s without problems. Its screws are extended, so that non-flowable products are drawn in below the hopper opening (like an extruder) and fed to the pump chamber. This ensures particularly gentle product transport – external extruders can be eliminated completely.

Consequently, the HYGHSPIN Hopper represents a very attractive 3-in-1 solution: Infeed, conveying, and cleaning are carried out in a single unit. It is available in modular form or with free shaft end,

Comments