Check Whether The Stainless Steel Submersible Pump Is Damaged Before Use


Before purchasing and using Stainless Steel Submersible Pump, please read these precautions carefully.

.

Before purchasing and using Stainless Steel Submersible Pump, please read these precautions carefully. Most will be common sense, but a few will ensure that your pump remains in complete working condition. Also, please take some time to carefully read the installation and operation manuals that come with each pump.

do:

Check if the pump is not damaged before use

If you buy a second-hand pump or rent a submersible pump, take some time to ensure that the pump is not damaged before use. Please take more time to ensure that the cable does not fray.

Connect to an appropriate power source

If you plan to use the pump during a flood, make sure it is connected to an appropriate power source. Keep the power source away from flooding.

Note the type of pump before installing to the collecting tank

If the pump fails while underwater, you will thank you lucky star for recording the pump type and model.

Ensure that the float switch can move without restriction

The main cause of submersible pump failure is the pump idling. This is usually caused by a float switch failure.

Make sure to clean the pump filter regularly

Once a month, ensure that the pump filter is disassembled and cleaned well. This will keep your pump in full working condition.

do not:

Use the power cord to reduce pump down

If wear occurs when lowering the pump's power cord, you can be sure to damage the pump. Electricity and water do not mix together. Please take some time to carefully lower the pump and secure it in place.

Let the water freeze around the pump

Water expands when it freezes. If the water freezes in the pump, it may damage the internal operation of the pump.

Keep the top of the sump open or undetected

The submersible pump can only be sealed when it is properly closed and covers the entire pump.

Let the pump run dry

The most important thing is not to let the pump run dry. The submersible is designed to be able to pump water at all times and must have a suitable water supply. Purchase a submersible with a float switch to ensure automatic shut-off.

Finally, choosing a brand of Submersible Pump Factory will make you more at ease.

Comments